175
Controls in detail
Operating system with steering wheel buttons*
3
Setting the windshield wiper
sensitivity
You can use the
Wipe sensor
function to
set the sensitivity of the rain sensor.
Press the è or ÿ button re-
peatedly until you see the
Vehicle
message in the display.
Press the j or k button re-
peatedly until you see the
Wipe sen-
sor
message in the display.
The current setting is highlighted.
Press the æ or ç button to
select the level of sensitivity of the
rain sensor.
Level 1
: High sensitivity
Wiping beings in light rain
Level 2
: Moderate sensitivity
Level 3
: Low sensitivity
Wiping only begins in heavy rain
Convenience submenu*
You can reach the
Convenience
submenu
via the
Settings
menu ( page 161).
Key-dependent settings
You can use the
Key
function to deter-
mine whether the settings in the:
Instrument cluster
Lighting
Vehicle
submenus are stored as key-dependent
settings.
Press the è or ÿ button re-
peatedly until you see the
Conve-
nience
message in the display.
N54.32-2272-31
nf_BA.book Page 175 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
