230
Controls in detail
Air conditioning
3
Setting the temperature
The temperature is set using temperatu-
re selector control
1 in the control pa-
nel (
page 228).
Only change the temperature in small in-
crements.
To increase: turn the temperature
selector control clockwise.
To reduce: turn the temperature se-
lector control slightly counterclock-
wise.
Setting the airflow
The airflow is set using the airflow cont-
rol
2 in the control panel ( page 228).
To increase/reduce: set the airflow
control to the desired level.
Setting the air distribution
The air distribution is set using the air
distribution control
2 in the control pa-
nel (
page 228).
i
If you use the basic settings for heat-
ing or ventilating the vehicle, you will
rarely need to adjust the tempera-
ture, airflow and air distribution
(
page 229).
The symbols on the air distribution
control have the following meanings:
Sym-
bols
Meaning
h Air from the side air
vents, center air vents
and ventilation vents
Ô
P
Air to the windshield
Air from the air vents
Ò Air to the windshield
Air from the air vents
Air to the footwell
Ó Air from the air vents
Air to the footwell
nf_BA.book Page 230 Friday, January 25, 2008 3:53 PM
To Next Page