Dodge 2008 Sprinter - Page 539

537
Practical hints
Changing bulbs
5
Entry lamp* W5W
1 Lamp housing
2 Bulb holder
3 Cable connector
 Press in the latching springs of lamp
housing
1 using a suitable tool, for
example a screwdriver.
 Pry off lamp housing 1.
 Remove cable connector 3.
 Turn bulb holder 2 in the direction
of the arrow and remove it together
with the bulb.
 Remove bulb 2 from the bulb holder.
 Press the new bulb into bulb
holder
2.
 Screw bulb holder 2 together with
the bulb into lamp housing
1.
 Connect cable connector 3. The
connector’s locking spring must en-
gage.
 Align lamp housing 1 and engage it.
Interior lamp K18W
Interior lamp
1 Lamp housing
2 Festoon lamp
N82.20-2081-31 N82.20-2079-31
nf_BA.book Page 537 Friday, January 25, 2008 3:53 PM