538
Practical hints
Changing bulbs
5
Switch off the lighting.
Press in the latching springs of lamp
housing
1 using a suitable tool, for
example a screwdriver.
Pry off lamp housing 1.
Remove bulb 2 from the bulb hold-
er.
Insert new bulb 2.
Align lamp housing 1 on the right
and engage it.
!CAUTION
Have the interior lamps in the over-
head control panel changed at an au-
thorized Sprinter Dealer which has
the necessary specialist knowledge
and tools to carry out the work re-
quired.
The manufacturer recommends that
you use an authorized Sprinter Deal-
er for this purpose.
You could damage the overhead con-
trol panel.
nf_BA.book Page 538 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
