EasyManua.ls Logo

Dodge 2008 Sprinter - Page 584

Dodge 2008 Sprinter
666 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
582
Practical hints
Jump-starting
5
Make sure that the two vehicles do
not touch.
Apply the handbrake or move the se-
lector lever to position
P.
Switch off all electrical consumers.
Switch on the battery isolating
switch* if necessary (
page 338).
Remove the key from the ignition
lock.
Open the hood ( page 318).
The jump-starting connection point is on
the left-hand side of the air cleaner in
the engine compartment when looking
in the direction of travel.
Jump-starting connection point
1 Positive terminal clamp of jumper cable
Remove the positive terminal cover
from the donor battery.
Connect positive terminal of donor
battery
2 to jump-starting connec-
tion point
1 with the jumper cable.
Start with the donor battery.
Using red positive terminal clamp 1
of the jumper cable, slide the red
protective cap of the jump-starting
connection point back with a clock-
wise turn and connect the positive
terminal clamp of the jumper cable
to the positive terminal of the jump-
starting connection point.
nf_BA.book Page 582 Friday, January 25, 2008 3:53 PM

Table of Contents