583
Practical hints
Jump-starting
5
1 Positive terminal of jump-starting con-
nection point (under cover)
2 Positive terminal of donor battery
3 Negative terminal of donor battery
4 Ground contact of own vehicle
(negative terminal of your own battery)
Run the other vehicle’s engine at
idling speed.
Connect negative terminal 3 of the
donor battery to ground contact
4
of your own vehicle.
Start with the donor battery.
Start the engine.
Disconnect the jumper cable from
negative terminal
3 of the battery
and ground contact
4 first, then
from positive terminal
2 of the bat-
tery and jump-starting connection
point
1.
The red protective cap springs back
to its initial position when the termi-
nal clamp is removed from the jump-
starting connection point.
Have the battery checked at an
authorized Sprinter Dealer.
i
Do not connect the jumper cable to
the auxiliary battery* in the engine
compartment. This is not suitable for
jump-starting operations.
nf_BA.book Page 583 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
