Dodge 2008 Viper - Taillight, Tail;Stop Light, Rear Marker Light; Tail;Stop Light; Taillight; Rear Marker Light

Taillight, Tail/Stop Light, Rear Marker Light
1. Open the trunk
2. Remove the two fasteners and then remove the access
panel.
3. Turn the appropriate bulb and socket assembly
counter-clockwise, and then pull it out of the upper light
assembly.
4. Pull the bulb out of the socket assembly.
1 — Rear Marker Light
2 — Tail/Stop Light
3 — Taillight
MAINTAINING YOUR VEHICLE 245
7