Blind Spot Alert Off
When the BSM system is turned off there will be no
visual or audible alerts from either the BSM or RCP
systems.
NOTE: The BSM system will store the current operating
mode when the vehicle is shut off. Each time the vehicle
is started the previously stored mode will be recalled and
used.
uconnectT phone — IF EQUIPPED
NOTE: The sales code RER and REU radios contain an
integrated uconnectt phone. Refer to your “Navigation
User’s Manual” for uconnectt phone operating instruc-
tions for these radios. Radio sales code can be located
on the lower right corner of the Radio faceplate.
uconnectt phone is a voice-activated, hands-free, in-
vehicle communications system. uconnectt allows you to
dial a phone number with your cellular phone using
simple voice commands (e.g., 9Call” { “Mike” {”Work9 or
9Dial” { “248-555-12129). Your cellular phone’s audio is
transmitted through your vehicle’s audio system; the
system will automatically mute your radio when using
the uconnectt phone.
NOTE: The uconnectt phone requires a cellular phone
equipped with the Bluetootht 9Hands-Free Profile,9 Ver-
sion 0.96 or higher. See the uconnectt website for sup-
ported phones.
For uconnectt customer support, visit the following
websites:
•
www.chrysler.com/uconnect
•
www.dodge.com/uconnect
•
www.jeep.com/uconnect
•
or call 1–877–855–8400
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113
3
To Next Page