navigating through an automated customer service cen-
ter menu structure, and to leave a number on a pager.
You can also send stored uconnectt phonebook entries as
tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the VOICE RECOGNITION button
and say, “Send.” The system will prompt you to enter the
name or number and say the name of the phonebook
entry you wish to send. The uconnectt phone will then
send the corresponding phone number associated with
the phonebook entry, as tones over the phone.
NOTE:
•
You may not hear all of the tones due to cellular phone
network configurations. This is normal.
•
Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is asking 9Would you like to pair a phone, clear
a...,9 you could press the VOICE RECOGNITION button
and say, 9Pair a Phone9 to select that option without
having to listen to the rest of the voice prompt.
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the uconnectt phone
will not repeat a phone number before you dial it).
•
Press the PHONE button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Setup Confirmations.9 The uconnectt phone will play
the current confirmation prompt status and you will
be given the choice to change it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129
3
To Next Page
Loading...
