•
The feature will “ready” when the vehicle speed is at
0 mph (0 km/h). The word “READY” will flash when
conditions are met for the event to begin.
•
Dashes will display if the vehicle fails to reach 60 mph
(100 km/h) in less then 10 seconds.
•
The time will continue to display until the FUNCTION
SELECT button is pressed.
•
Pressing the FUNCTION SELECT button will clear the
current run time and display the vehicle’s best
0-60 mph (0-100 km/h) time.
•
To clear the vehicle’s best 0-60 mph (0-100 km/h) time,
press and hold the FUNCTION SELECT button for
five seconds.
Braking Distance
When selected, this screen displays the vehicle’s braking
distance and the speed at which the brake pedal was
depressed.
•
This feature will only function when applying the
brakes at speeds above 30 mph (48 km/h).
•
Engaging the parking brake will disable this feature.
•
The word “READY” will flash when conditions are
met for the event to begin.
•
The distance and speed measurements display while
the event is taking place.
•
The distance measurement will be aborted if the brake
pedal is released before the vehicle comes to a com-
plete stop.
•
The distance and speed measurements will continue to
display until the FUNCTION SELECT button is
pressed.
•
Pressing the FUNCTION SELECT button will clear the
current run and prepare the cluster to record a new
run.
UNDERSTANDING YOUR INSTRUMENT PANEL 173
4
To Next Page
Loading...
