UCI supports Mini, 4G, Photo, Nano, 5G iPod威 and
iPhone威 devices. Some iPod威 software versions may not
fully support the UCI features. Please visit Apple’s
website for software updates.
NOTE:
•
If the radio has a USB port, connecting an iPod威 to this
port does not play the media. For playing an iPod威,
use the separate 16–pin connector port located in the
center console.
•
Connecting an iPod威 to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPod姞
Use the optional connection cable to connect an iPod威 to
the vehicle’s 16–pin connector port located on the center
console. Once the iPod威 is connected and synchronized
to the vehicle’s UCI system (iPod威 may take a few
seconds to connect), the iPod威 starts charging and is
ready for use by pressing radio switches, as described
below.
NOTE:
•
You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
•
If the iPod威 battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod威 connected
to the UCI system may charge it to the required level.
Using This Feature
By using the optional connection cable to connect an
iPod威 to the vehicle’s UCI 16–pin connector port:
•
The iPod威 audio can be played on the vehicle’s sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
218 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
