Dodge 2010 Viper - Taillamp, Tail;Stop Lamp, Rear Marker Lamp; Rear Marker Lamp; Tail;Stop Lamp; Taillamp

Taillamp, Tail/Stop Lamp, Rear Marker Lamp
1. Open the trunk
2. Remove the two fasteners and then remove the access
panel.
3. Turn the appropriate bulb and socket assembly coun-
terclockwise, and then pull it out of the upper lamp
assembly.
4. Pull the bulb out of the socket assembly.
1 — Rear Marker Lamp
2 — Tail/Stop Lamp
3 — Taillamp
256 MAINTAINING YOUR VEHICLE