ROOF LUGGAGE R ACK
• The crossbars on your vehicle are
delivered stowed within the roof rack
side rails. When installed, the roof
rack can hold a maximum of 150 lbs
(68 kg) of evenly distributed weight.
Installing The Crossbars
• To install the crossbars, completely
loosen the thumb screws at both
ends and lift the crossbar from its
stowed position.
• Bend the pivot points at each end of
the crossbar and slide the thumb
screw down.
• Set the crossbars into position and
tighten the thumb screws.
NOTE: Position the crossbars across the
roof making sure the letters on the
crossbar align with the matching letters
on the side rail.
• Refer to the Owner's Manual on the
DVD for further details.
UTILITY
60
To Next Page
Loading...
