Dodge 2011 Nitro - Fluids and Capacities

FLUIDS AND CAP ACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant 3.7L,
4.0L
MOPAR
®
Antifreeze/Coolant Five
Year/100,000 Mile Formula HOAT
(Hybrid Organic Additive
Technology) or equivalent.
14 Quarts
(13.3 Liters) Includes
heater and coolant
recovery bottle filled
to MAX level.
Engine Oil with Filter
3.7L
API certified 5W-20 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your oil filler cap
for correct SAE grade.
5 Quarts (4.7L Liters)
Engine Oil with Filter
4.0L
API certified 10W-30 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your oil filler cap
for correct SAE grade.
5.5 Quarts (5.2 Liters)
Fuel Selection 3.7L,
4.0L
87 Octane acceptable. 89 octane
Recommended for 4.0L.
19.5 Gallons
(73.8 Liters)
Engine Oil Filter 3.7L,
4.0L
MOPAR
®
Engine Oil Filter or
equivalent.
—
Spark Plug 3.7L ZFR6F–11G (Gap 0.043 in
[1.09 mm])
—
Spark Plug 4.0L ZFR5LP-13G (Gap 0.050 in
[1.27 mm])
—
Automatic
Transmission
MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or equivalent
licensed ATF+4
®
product.
—
Transfer Case MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or equivalent
licensed ATF+4
®
product.
—
Front Axle SAE80W-90 Multi–Purpose Type
GL-5 Gear Lube or equivalent.
—
Rear Axle MOPAR
®
Synthetic Gear & Axle
Lubricant SAE 75W–90 or
equivalent.
—
Brake Master Cylinder MOPAR
®
DOT 3 and SAE J1703
should be used or equivalent. If
DOT 3 is not available, then DOT 4
is acceptable. Use Only
recommended Brake Fluids.
—
Power Steering
Reservoir
MOPAR
®
Power Steering Fluid +4 or
MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or equivalent
licensed ATF+4
®
product.
—
MAINTAINING YOUR VEHICLE
65