Start pairing procedure on the radio
• Models 8.4, 8.4N: Touch the Phone soft-key and then the Settings soft-key. Next,
touch Add Device.
• Models 4.3, 4.3S: Press the More hard-key, then touch the Phone soft-key. Next,
touch the settings soft-key and then Add Device.
• Uconnect™ Phone will display an “In progress” screen while the system is
connecting.
Start pairing procedure on mobile phone
• Search for available devices on your
Bluetooth
®
enabled mobile phone.
This is usually within Settings or
Options under “Bluetooth”. See your
mobile phone’s manual for details.
• When your phone finds the system,
select “Uconnect” as the paired
device.
Complete the pairing procedure
• When prompted on the phone, enter
the 4-digit PIN number shown on the
Uconnect Touch™ Screen.
• If your phone asks you to accept a
connection request from Uconnect,
select “Yes”. If available, check the
box telling it not to ask again – that
way your phone will automatically
connect each time you start the
vehicle.
Models 4.3 & 4.3S
Models 8.4 & 8.4N
ELECTRONICS
52
To Next Page
Loading...
