Dodge 2014 Challenger - Fluids and Capacities

FLUIDS AND CAPACITIES
Non-SRT
Component Fluid, Lubricant, or Genuine
Part
Capacities
Engine Coolant – 3.6L Engine We recommend you use
MOPAR® Antifreeze/Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive Tech-
nology).
11.1 Quarts (10.5 Liters) In-
cludes heater and coolant
recovery bottle filled to MAX
level.
Engine Coolant – 5.7L Engine We recommend you use
MOPAR® Antifreeze/Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive Tech-
nology).
14.7 Quarts (13.9 Liters) In-
cludes heater and coolant
recovery bottle filled to MAX
level.
Engine Oil with Filter – 3.6L
Engine
We recommend you use API
Certified SAE 5W-20 Engine
Oil, meeting the requirements
of Chrysler Material Standard
MS-6395 such as MOPAR®,
Pennzoil®, and Shell Helix®.
Refer to your engine oil filler
cap for correct SAE grade.
6 Quarts (5.6 Liters)
Engine Oil with Filter – 5.7L
Engine
We recommend you use API
Certified SAE 5W-20 Engine
Oil, meeting the requirements
of Chrysler Material Standard
MS-6395 such as MOPAR®,
Pennzoil®, and Shell Helix®.
Refer to your engine oil filler
cap for correct SAE grade.
7 Quarts (6.6 Liters)
Engine Oil Filter We recommend you use
MOPAR® Engine Oil Filters.
–
Spark Plug – 3.6L Engine We recommend you use
MOPAR® Spark Plugs (Gap
0.043 in [1.1 mm]).
–
Spark Plug – 5.7L Engine We recommend you use
MOPAR® Spark Plugs (Gap
0.043 in [1.1 mm]).
–
Automatic Transmission
We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid.
Failure to use ATF+4® fluid
may affect the function or
performance of your trans-
mission.
–
MAINTAINING YOUR VEHICLE
112