ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)
• The EVIC features a driver interactive dis-
play that is located in the instrument
cluster. Pressing the controls on the left
side of the steering wheel allows the
driver to select vehicle information and
Personal Settings. For additional infor-
mation, refer to Programmable Features
in this guide.
• Press and release the UP
button to
scroll upward through the main menus
(Main Gauge, MPH/km/h, Vehicle Info,
Terrain, Driver Assist, Fuel Economy, Trip
A, Trip B, Audio, Stored Messages, Screen
Set Up).
• Press and release the DOWN
button
to scroll downward through the main
menu and submenus (Main Gauge, MPH/
km/h, Vehicle Info, Terrain, Driver Assist,
Fuel Economy, Trip A, Trip B, Audio, Stored Messages, Screen Set Up).
• Press and release the RIGHT
button to access the information screens or sub-menu
screens of a main menu item.
• Press the BACK/LEFT
button to access the information screens or sub-menu
screens of a main menu item.
• Press the OK button to access/select the information screens or sub-menu screens of a
main menu item. Press and hold the OK arrow button for two seconds to reset displayed/
selected features that can be reset.
Compass Calibration
• This compass is self-calibrating, which eliminates the need to set the compass manu-
ally. When the vehicle is new, the compass may appear erratic and the EVIC will display
“CAL” until the compass is calibrated.
• You may also calibrate the compass by completing one or more 360 degree turns (in an
area free from large metal or metallic objects) until the “CAL” message displayed in the
EVIC turns off. The compass will now function normally.
ECO
• The ECO message will appear in your EVIC display whenever you are driving in a fuel
efficient manner.
• This feature allows you to monitor when you are driving in a fuel efficient manner, and it
can be used to modify driving habits in order to increase fuel economy.
1 — EVIC Controls
ELECTRONICS
109
To Next Page
Loading...
