2. Open the fuel filler door.
NOTE:
In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly
push on the fuel door to break the ice buildup and re-release the fuel door using the inside
release button. Do not pry on the door.
3. There is no fuel filler cap. A flapper door inside the pipe seals the system.
4. Insert the fuel nozzle fully into the filler pipe, the nozzle opens and holds the flapper door
while refueling.
5. Fill the vehicle with fuel, when the fuel nozzle “clicks” or shuts off the fuel tank is full.
6. Remove the fuel nozzle and close the fuel door.
MAINTAINING YOUR VEHICLE
151
To Next Page
Loading...
