Stopping
1. Bring the vehicle to a complete stop.
2. Shift the Transmission to P ARK (P).
3. Push the ENGINE START/STOP button once. The ignition switch will return to the OFF
position.
NOTE:
If the transmission is not in PARK and the vehicle is in motion, the ENGINE START/STOP
button must be held for two seconds with the vehicle speed above 5 mph (8 km/h) before
the engine will shut off.
Accessory Positions With Engine Off
NOTE:
The following functions are with the driver’s foot off of the Brake Pedal (transmission in
PARK or NEUTRAL).
Beginning With The Ignition Switch In The OFF Position:
1. Push the ENGINE ST AR T/STOP button once to cycle the ignition to the ACC position.
2. Push the ENGINE ST ART/STOP button a second time to cycle the ignition to the
ON/RUN position.
3. Push the ENGINE ST AR T/STOP button a third time to return the ignition to the OFF
position.
NOTE:
If the ignition is left in the ACC or ON/RUN
(engine not running) position and the trans-
mission is in P ARK, the system will auto-
matically time out after 30 minutes of inac-
tivity, and the ignition is returned to the OFF
position.
Ignition Positions
GETTING STARTED
14
To Next Page
Loading...
