Trailer Hitch Receiver Cover Removal — If Equipped
Your vehicle may be equipped with a trailer hitch receiver cover , this must be removed to
access the trailer hitch receiver (if equipped). This cover is located at the bottom center
of the rear fascia.
1. Turn the two locking retainers located at the bottom of the hitch receiver cover a 1/4
turn counterclockwise and pull bottom of the hitch receiver cover outward (towards
you).
2. Pull the bottom of the cover outward (towards you) then downwards to disengage the
tabs located at the top of the hitch receiver cover to remove.
Hitch Receiver Cover
1 — Cover Tab Locations
2 — Locking Retainers
Hitch Receiver Cover
UTILITY
159
To Next Page
Loading...
