3.
Remove the rubber cupholder liner. Squeeze one side of
the liner’s center to expose its edge and facilitate removal.
4. Turn the ignition to the ACC or ON/RUN position,
but do not start the engine.
5. Press and maintain firm pressure on the brake pedal.
6. Insert a screwdriver or similar tool into the access hole
(at the front of the cupholder) and push and hold the
override release lever forward.
7. Move the shift lever to the NEUTRAL position.
8. The vehicle may then be started in NEUTRAL.
9. Reinstall the cupholder liner.
TOWING A DISABLED VEHICLE
This section describes procedures for towing a disabled
vehicle using a towing service.
Towing Condition Wheels OFF the Ground All Models
Flat Tow NONE If transmission is operable:
• Transmission in NEUTRAL
• 25 mph (40 km/h) max speed
• 15 mi (24 km) max distance
Wheel Lift Or Dolly Tow Rear
Front OK
Flatbed ALL BEST METHOD
414 WHAT TO DO IN EMERGENCIES
To Next Page
Loading...
