CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technol-
ogy (OAT) engine coolant (antifreeze), may result in engine damage and may
decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, the cooling system will need to be drained, flushed, and refilled with
fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as
possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not
recommended.
Chassis
Component Fluid, Lubricant, or Genuine Part
Manual Transmission – If
Equipped
W e recommend you use MOPAR
®
ATF+4
®
Automatic Trans-
mission Fluid.
8-Speed Automatic Trans-
mission – If Equipped
Use only MOP AR
®
ZF 8&9 Speed ATF™ Automatic Trans-
mission Fluid, or equivalent. Failure to use the correct fluid
may affect the function or performance of your transmis-
sion.
Brake Master Cylinder We recommend you use MOPAR
®
DOT 3, SAE J1703. If
DOT 3 brake fluid is not available, then DOT 4 is accept-
able.
Rear Axle – If Equipped with
Automatic Transmission
W e recommend you use MOPAR
®
OD Synthetic Gear Lubri-
cant SAE 75W85 (API GL-5).
Rear Axle – If Equipped with
Manual Transmission
W e recommend you use MOPAR
®
LSD Synthetic Gear Lu-
bricant SAE 75W85 (API GL-5).
MAINTAINING YOUR VEHICLE
200
To Next Page
Loading...
