FLUIDS, LUBRICANTS AND GENUINE PARTS — SRT
Engine
Component Fluid, Lubricant, or Genuine Part
Engine/Intercooler Coolant We recommend you use MOP AR
®
Antifreeze/Coolant
10 Y ear/150,000 Mile Formula OAT coolant conforming to
MS.90032.
Engine Oil For best performance and maximum protection under all
types of operating conditions, the manufacturer only recom-
mends full synthetic engine oils.
The manufacturer recommends the use of Pennzoil UltraTM
0W -40 or equivalent MOP AR
®
engine oil meeting the re-
quirements of FCA US Material Standard MS-12633 for
use in all operating temperatures.
Engine Oil Filter MOPAR
®
Engine Oil Filter or equivalent.
Spark Plugs W e recommend you use MOPAR
®
Spark Plugs.
Fuel Selection We recommend you use Premium Unleaded 91 Octane or
higher.
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technol-
ogy (OAT) engine coolant (antifreeze), may result in engine damage and may
decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, the cooling system will need to be drained, flushed, and refilled with
fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as
possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not
recommended.
MAINTAINING YOUR VEHICLE
201
To Next Page
Loading...
