2. Separating key fob halves requires screw removal, if
equipped, and gently prying the two halves of the key
fob apart. Make sure not to damage the seal during
removal.
3. Remove the battery by turning the back cover over
(battery facing downward) and tapping it lightly on a
solid surface such as a table or similar, then replace the
battery. When replacing the battery, match the + sign
on the battery to the + sign on the inside of the battery
clip, located on the back cover. Avoid touching the
Emergency Key Removal Separating Key Fob Case
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
