• The Launch Control button is disabled.
• Engine power is reduced.
To exit Valet Mode, you must enter the same 4 digit PIN
that was used to enter the mode. The unlock keypad can
be accessed by either pushing the SRT button on the
faceplate, or pressing the “Valet Mode Active – Press
Here to Exit” button on the touchscreen.
The Valet Mode Deactivation key pad will then prompt
you for your 4 digit PIN code. Enter your PIN code, and
Valet Mode Deactivation
Valet Mode Deactivation PIN
330 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
