Controlling The iPod® Or External USB Device
Using Radio Buttons
To enter the iPod®/USB/MP3 control mode and access a
connected audio device, either push the “AUX” button
on the radio faceplate or push the VR button and say
⬙USB⬙ or ⬙Switch to USB.⬙ Once in the iPod®/USB/MP3
control mode, audio tracks (if available from audio
device) start playing over the vehicle’s audio system.
Play Mode
When switched to iPod®/USB/MP3 control mode, the
iPod® or external USB device automatically starts Play
mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod® or external
USB device and display data:
• Use the TUNE/SCROLL control knob to select the next
or previous track.
• Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or push the
VR
button and say ⬙Next Track.⬙
• Turning it counterclockwise (backward) by one click,
will jump to the previous track in the list or push the
VR
button and say ⬙Previous Track⬙
• Jump backward in the current track by pushing and
holding the << RW button. Holding the << RW
button long enough will jump to the beginning of the
current track.
• Jump forward in the current track by pushing and
holding the FF>> button.
• A single push backward << RW or forward FF>> will
jump backward or forward respectively, for five sec-
onds.
• Use the << SEEK button during play mode to jump to
the start of the current track. Pushing the SEEK>>
4
UNDERSTANDING YOUR INSTRUMENT PANEL 373
To Next Page
Loading...
