4. Using a small screwdriver or similar tool, remove the
shift lever override access cover (located on the bot-
tom of the cupholder).
5.
Press and maintain firm pressure on the brake pedal.
6.
Insert the screwdriver or similar tool into the access
hole, and push and hold the override release lever
down.
7. Move the shift lever to the NEUTRAL position.
8. The vehicle may then be started in NEUTRAL.
9. Reinstall the shift lever override access cover and
cupholder liner.
TOWING A DISABLED VEHICLE
This section describes procedures for towing a disabled
vehicle using a commercial wrecker service. If the trans-
mission and drivetrain are operable, disabled vehicles
may also be towed as described under “Recreational
Towing” in the “Starting and Operating” section.
Shift Lever Override Access Cover
6
WHAT TO DO IN EMERGENCIES 599
To Next Page
Loading...
