open or partially open positions. This is a normal occur-
rence and can be minimized. If the buffeting occurs with
the rear windows open, then open the front and rear
windows together to minimize the buffeting. If the
buffeting occurs with the sunroof open, adjust the sun-
roof opening to minimize the buffeting.
LIFTGATE
To Unlock/Enter The Liftgate
The liftgate passive entry unlock feature is built into the
electronic liftgate handle. With a valid Passive Entry RKE
transmitter within 3 ft (1.0 m) of the liftgate, push the
electronic liftgate handle to open with one fluid motion.
NOTE: If “Unlock All Doors 1st Press” is programmed in
Uconnect® Settings, all doors will unlock when you push
the button on the liftgate. If ⬙Unlock Driver Door 1st
Press⬙ is programmed in Uconnect® Settings, the liftgate
will unlock when you push the button on the liftgate. For
further information, refer to “Uconnect® Settings” in
“Understanding Your Instrument Panel.”
To Lock The Liftgate
With a valid Passive Entry RKE transmitter within 3 ft
(1.0 m) of the liftgate, push the passive entry lock button
located to the right of electronic liftgate handle.
NOTE: The liftgate passive entry lock button will only
lock the liftgate; the liftgate unlock feature is built into
the electronic liftgate handle.
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45
To Next Page
Loading...
