• Save
Pressing the “Save” button will let you save from
the visible page, current/last/best. Any saved
run over ten will overwrite the last saved run for
Uconnect System storage. The operation of the
Save feature is listed below:
NOTE:
Pressing the “Camera” icon in the upper right
corner of the screen at any time will save a
screenshot of the screen currently being viewed
to the connected USB device.
• With a USB jump drive installed, press the
“USB” button to save to the jump drive.
• Press the “Uconnect” button to save the runs
to the Owner web page.
• Press the “Cancel” button to view the last
timer “Ticket”.
The “Tickets” contain the timers listed below:
• Reaction Time
Measures the driver’s reaction time for launch-
ing the vehicle against a simulated drag strip
timing light (behavior modeled after 500 Sports-
man Tree) displayed in the instrument cluster
display.
NOTE:
The Reaction Time, MPH, ⅛ and ¼ Mile timers
will be “ready” when the vehicle is at 0 MPH
(0 km/h).
• 0-60 MPH (0-100 km/h)
Displays the time it takes for the vehicle to go
from 0 to 60 mph (0 to 100 km/h).
• 0-100 MPH (0-160 km/h)
Displays the time it takes for the vehicle to go
from 0 to 100 mph (0 to 160 km/h).
• 60 ft
Displays the time it takes for the vehicle to go an
60 feet (18 meters).
• ⅛ Mile (200 meter) ET
Displays the time it takes for the vehicle to go ⅛
mile (200 meters).
• ⅛ Mile (200 meter) MPH
Displays the vehicle speed at the time ⅛ mile
was reached.
• ¼ Mile (400 meter) ET
Displays the time it takes for the vehicle to go ¼
mile (400 meters).
• ¼ Mile (400 meter) MPH
Displays the speed the vehicle was at when ¼
mile was reached.
• Brake Distance ft
Displays the distance it takes the vehicle to
make a full stop.
NOTE:
The distance measurement will be aborted if the
brake pedal is released or the parking brake is
engaged, before the vehicle comes to a com-
plete stop.
Performance Pages — Save
281
To Next Page
Loading...
