Dodge Ram 3500 - Rear Light Bar ID Marker (Dual Rear Wheel) - If Equipped; Side Marker Lights (Dual Rear Wheels)

Rear Light Bar ID Marker (Dual Rear Wheel) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket
1
⁄ 4 turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse procedure for installation of bulbs and hous-
ing.
Side Marker Lights (Dual Rear Wheels)
1. Push rearward on the side marker light assembly.
2. Pull the entire assembly from the fender.
MAINTAINING YOUR VEHICLE 469
7