•
The UConnect™ system will confirm the phone num-
ber and then dial. The number will appear in the
display of certain radios.
Call by Saying a Name
•
Press the “Phone” button to begin.
•
After the 9Ready9 prompt and the following beep, say
“Call.9
•
System will prompt you to say the name of the person
you want call.
•
After the 9Ready9 prompt and the following beep, say
the name of the person you want to call. For example,
you can say 9John Doe,9 where John Doe is a previ-
ously stored name entry in the UConnect™ phone
book. Refer to 9Add Names to Your UConnect™
Phonebook,9 to learn how to store a name in the phone
book.
•
The UConnect™ system will confirm the name and
then dial the corresponding phone number, which
may appear in the display of certain radios.
Add Names to Your UConnect™ Phonebook
NOTE: Adding names to phone book is recommended
when vehicle is not in motion.
•
Press the “Phone” button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Phonebook New Entry.9
•
When prompted, say the name of the new entry. Use of
long names helps the voice recognition and it is
recommended. For example, say 9Robert Smith9 or
9Robert9 instead of 9Bob.9
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To Next Page
Loading...
