EasyManua.ls Logo

Dodge SRT VIPER 2014 - Engine Starting and Stopping

Dodge SRT VIPER 2014
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING!
Always apply the parking brake fully when parked to guard against vehicle move-
ment and possible injury or damage.
When leaving the vehicle, always remove the key fob from the ignition and lock your
vehicle.
Never leave children alone in a vehicle, or with access to an unlocked vehicle.
Allowing children to be in a vehicle unattended is dangerous for a number of
reasons. A child or others could be seriously or fatally injured. Children should be
warned not to touch the parking brake, brake pedal or the shift lever .
Do not leave the key fob in or near the vehicle, or in a location accessible to
children, and do not leave the ignition of a vehicle equipped with Keyless
Enter -N-Go™ in the ACC or ON/RUN mode. A child could operate power windows,
other controls, or move the vehicle
ENGINE STARTING/STOPPING
Starting
1. Fully apply the parking brake.
2. Press the clutch pedal to the floor.
3. Place the shift lever in NEUTRAL.
4. Press the red ENGINE ST ART/STOP
button located on the instrument panel.
Release the button when the engine
starts.
NOTE:
The engine will not start unless the clutch
pedal is pressed to the floor.
Stopping
1. Bring the vehicle to a complete stop.
2. Fully apply the parking brake.
3. Press the clutch pedal to the floor.
4. Place the shift lever in NEUTRAL/1st Gear.
5. Press the ENGINE ST ART/STOP button once. The ignition switch will return to the OFF
position.
GETTING STARTED
9

Table of Contents

Related product manuals