2. Click on the “RECORD” folder to access your recording files. It should be empty when
you access it for the first time.
SETTING UP THE CURRENT DATE/TIME ON THE RECORDER
In order to synchronize the date and time with your current time zone, please follow these steps:
1. Turn off the recorder and connect it to your computer using the included data cable.
2. Click on the “Time Synchronization Tool” folder and execute “time.exe” from a Windows
machine. If you do not have a Windows computer, please update the “date” and “timme”
parameters on the “factory.txt” file. Please see instructions below.
3. This program will synchronize the time from your computer with the time on the recorder
so that the recording files will have the correct date and time.
RECORDING FOR THE FIRST TIME
By default, the Dododuck Q1 is in normal recording mode. In order to start recording:
1. Unplug the cable from the recorder.
2. Move the switch to the power-on position to start recording. The light will turn red and
blink 5 times. Once you are finished, turn off the recorder and the files will be saved
automatically.
PLAYING RECORDINGS
It is recommended that you access the recordings by connecting the recorder to your computer.
Once you access the recording files, you can copy them to your favorite device or listen to them
directly from your computer.
It is also possible to listen to the recordings directly from the Dododuck Q1 on a limited basis.
Playing files from the recorder:
1. Connect the adapter and headphones.
2. Turn on the recorder.
3. The recordings will start playing sequentially from the most recent.
4. To skip to the next recording press the + key and to go to the previous recording press
the - key
5. To pause, click on the M button for 1 second until the light blinks, alternating from red to
blue
VOICE ACTIVATED RECORDING
1. To turn on voice activated recording, connect the adapter and click on pause (M button)
until the light blinks, alternating from red to blue. During pause mode, long press M key
for 3 seconds, The indicator light will flash blue lights several times quickly. Turn off the
recorder.
2. You will know that you are in voice activated mode when you turn on the Q1 recorder.
The light will blink blue 5 times.
To Next Page
Loading...
Need help?
General
