DOEPFER A-100 Series User Guide

mounting hole
5V voltage regulator
(1) IEC socket for
mains connection
(2) fuse holder
and fuse
separating line (if supply
unit and bus board are
used separately)
soldering points for
optional flat connectors
(3) control LEDs fo
r
+5V, +12V and –12V
(4) pin headers for
module connection
mounting holes
power supply
module

DOEPFER A-100 Series Specifications

General

Type	Modular Synthesizer System
Manufacturer	Doepfer Musikelektronik GmbH
Power Supply	External Power Supply
Current Consumption	Depends on modules installed
Dimensions	Varies by case size
Number of Slots	Varies by case size
Width	Varies by case size