Need help?Do you have a question about the DOEPFER A-100 DIY Kit 1 and is the answer not in the manual?
General| Brand | DOEPFER |
|---|---|
| Model | A-100 DIY Kit 1 |
| Category | Measuring Instruments |
| Language | English |
Lists top/bottom cover, rear panel, and left/right sideplates for frame construction.
Marking holes on wooden parts for bus board and power supply board mounting.
Process of drilling holes and attaching stand-off bolts for module mounting.
Close-up view of stand-off bolts attached to the bus board.
Optional rear panel connection, such as an XLR connector for power.
Details on mounting aluminum rails using M5x20 screws to side plates.
Explanation of M3 nut insertion into rail grooves and use of self-tapping M5 screws.
Shows case with mounted bus board, power supply, and optional connector.
Detailed rear view of the case including an XLR connector.
Illustrates the top cover with additional wooden strips.
Shows the completely assembled case from top and front views.
Diagrams showing front and side views with dimensions for 3U, 6U, and 9U cases.
Detailed view of mounting holes for profiles and bus boards.
To Next Page