doepfer
System A - 100 6. Standard items included
17
6. Items included as standard
The following parts are included in each order:
A-100BS1/BS2/MS - Basic Systems
• Rack system (basic frame), completely assem-
bled, including two system bus boards, one 12V,
650mA power supply, internal power cables.
• All modules specified for the System (BS1, BS2 or
MS) completely assembled, tested and mounted
into the frame
• 30 patch leads for A-100BS1 and BS2
• 15 patch lead for A-100MS
• External power lead.
• Complete instruction manual (containing the ma-
nuals of all modules)
• +5V supply is not
included (only the +5V low cost
adapter for A-100BS1 and MS)
A-100G3/G6 - Rack System 3HU/6HU
• Rack system, completely assembled, including
two system bus boards, one 12V, 650mA power
supply, internal power cables.
• External power lead.
• +5V supply is not
included
A- XXX - any module
• Module A-XXX.
• Ribbon cable for connection to the system bus.
• Fixing screws.
The instruction manual is not included when ordering
a single module or frame. In this case the complete
instruction manual has to be ordered additionally!
To Next Page
