4. Software installation
Review https://youtu.be/CGZ4N-SRfso?t=122 and get latest SimRacingStudio (SRS) app https://www.simracingstudio.com/download
SRS is the “brains” of the system, and will allow you to test the connection of the platform to your
computer. You must have SRS running when playing games, as it tells the platform what the game
needs, so the platform moves with the game action.
4.1 INSTALL LICENSE
Go to SETUP- > LICENSE tab and ACTIVATE your license by entering the license number you received in
an email from either SRS or DOF Reality (Check your spam folder). If you can’t find your license, you can
recover it by going to: license | | recover | then enter the email used to purchase your DOF hardware.
4.2 CONFIGURE HARDWARE
Go to SETUP-> Hardware and select your model.
Wait 30 seconds to see if “motionbox” becomes green (Bottom right corner of hardware status)
1. Green = Connected and License OK
2. Yellow = Connected but license not activated
3. Red = not connected to your DOF motion platform
If the motionbox is not connected, try to reboot your PC. If after you reboot, it is still not
connected, try these instructions to manually connect:
https://docs.google.com/document/d/10PoaStPtHJCo5WiMVVhPfOkooxE7GzrzfS7FDFSkoPM/e
dit?usp=sharing
If SRS is still not connected, please check section 5.2 of this manual or contact support.
4.3 TEST HARDWARE
Once connected, use your mouse to move TEST sliders and see if platform is moving and in the correct
direction.
To Next Page
Loading...
