What to do if the tool constantly ascends/descends on DOGA SLIDER Industrial Equipment?
If the tool constantly ascends or descends when using DOGA Industrial Equipment, it's important to verify that the tool's weight aligns with the arm's capacity. Consult paragraph 3.1 in the manual for guidance on balancer settings to resolve this issue.
How to troubleshoot encoder signal not received on DOGA SLIDER Industrial Equipment (PC series)?
To address this, check the connection of the encoders to the junction box and the DPC Touch V2. Also, verify the encoder isn't damaged; replace it if necessary.
What to do if angular encoder signal does not change on a certain angle on DOGA Industrial Equipment (BA RPC series)?
If the angular encoder signal doesn't change on a certain angle for your DOGA Industrial Equipment (BA RPC series), the encoder's blind spot might be oriented towards the working area. Rotate the encoder by 180°, referring to paragraph 2.4.8 for instructions.
How to fix DOGA Industrial Equipment when the arm does not reach the required position?
To resolve this, check the stroke and the distance relative to the plate's mounting point. If needed, dismantle the arm and remount it closer.
Crucial information regarding product alterations and ordering spare parts.
Details on identifying and referencing different Slider torque reaction arm models.
Overview of DOGA's Slider torque reaction arms and their functions.
Visual and component breakdown of standard Slider torque reaction arm models.
Detailed technical data, including torque, load, and dimensions for various models.
Guidelines for setting up the torque reaction arm within a workstation environment.
Instructions for safely removing the torque reaction arm from its packaging.
Information on customizing the arm with options and accessories.
Procedures and considerations for installing the torque reaction arm.
Guidance on adjusting the balancer for optimal arm performance.
How to operate the torque reaction arm in its standard mechanical configuration.
Instructions for utilizing the position control features of the arm.
General procedures for maintaining the torque reaction arm's condition.
Guidance on diagnosing and resolving common arm malfunctions.
Information on ordering replacement parts for the torque reaction arm.
Contact information and procedures for obtaining technical assistance.
Procedures for returning equipment for service, repair, or adjustment.
Information and conditions for requesting on-site repair services.
Details on the product warranty coverage and conditions.
Essential safety guidelines and precautions for using the manual.
Identification of potential hazards and risks associated with the arm's operation.
Conditions and environments where the arm should not be used.
Information about the manufacturer, DOGA, and their contact details.
Explanation of labels, symbols, and compliance markings on the equipment.
Guidelines for safely transporting and storing the torque reaction arm.
Procedures for proper disposal and recycling of the equipment.
Access to the EC Declaration of Conformity for regulatory compliance.
General| Category | Industrial Equipment |
|---|---|
| Type | SLIDER |
| Manufacturer | DOGA |
| Series | SLIDER |
| Material | Steel |
| Application | Industrial |
To Next Page