To Next PageTo Next Page
Need help?Do you have a question about the DoggyRide Mini and is the answer not in the manual?
General| Weight Capacity | 55 lbs |
|---|---|
| Dog Size | Small |
| Frame Material | Steel |
| Foldable | Yes |
| Compatibility | Most bicycles |
| Wheel Size | 12" |
| Category | Bike Trailer |
| Hitch Type | Universal |
| Material | Nylon |
| Type | Trailer |
| Safety Features | Safety Flag |
Detailed steps for installing the DoggyRide Mini, including cabin, wheels, and accessories.
Unfold the cabin so that both sides stand upward vertical.
Determine riding direction by tyre profile; V-shape must point forward for correct installation.
Position wheel, insert pin, inflate tires to 2.1 bar (30 psi). Check lock by pulling.
Push lever backward on holder to remove wheel.
Roll up windows and secure with buckle and cord.
Rear opening has a pouch for items; close cover, beware items can fall out.
Rear opening contains a bottle holder; remove before unzipping rear opening.
Place reflectors below rear entry; mount by screwing through metal rings.
Position trailer rear side up, push wheel bar into center holder.
Insert quick release pin, turn lever to lock.
Position push bar into rear holders, push pins into openings to secure.
Slide brake over frame, align holes, insert and secure bolts with wrench no 10.
Push red cap with foot to brake; push underneath to release.
Install tow bar into center holder at front, secure with quick release pin.
Unscrew axle bolt or remove quick release pin, place hitch over axle, position pin backward, secure bolt.
Slide tow bar end over hitch pin, align holes, push safety pin through and lock.
Insert safety flag into opening in canopy on left rear side.
Store tow bar on rear side holder, secure with quick release pin. Avoid injury if parked.
Install the front wheel as described in section 2.1 and 2.2.
Install the tow bar as described in section 2.3.
Install the parking brake as described in section 2.4.
Store front wheel at backside holder; push tube upward, push quick release through holder.
Install the tow bar as described in section 3.1.
Install the safety flag as described in section 3.5.
Check tire pressure, clean wheels, check tire profile, and inflate tires to 2.1 bar.
Clean frame with mild soap and warm water; avoid thinner or acetone.
Regularly check tow bar for damage or cracks; replace if damaged.
Clean canopy with lukewarm water and mild soap. Ensure dry storage.
Store in dry space, avoid direct sunlight, store wheels separately to prevent dents.
Check connection to bicycle before use.
Not for human transport. Adhere to speed limits (15 mph/25 km/h). Do not overload (55 lbs/25 kg).
Use lights after sunset, beware of trailer width, and increased braking distance. Leash dogs inside.
