Doheny's Spa Vacuum - User Manual

Spa Vacuum
Item #7582
10411 80th Avenue Pleasant Prairie, WI 53158|Orders and Customer Care: 1-800-574-7665|Fax: 1-800-323-5932|Doheny.com
USER MANUAL & INSTRUCTIONS
The Spa Vacuum is ideal for spas and hot tubs of every size and surface. It is completely independent of your
spa’s ltration system and fully self-contained as well. Cleaning is easy — just press a button and the quiet and
efcient simple pump action creates suction that draws in water, dirt, and debris from pool or spas. The dirt
and debris get trapped inside the lter basket as the water ows out. This hand held vacuum cleaner is easy
to install and maneuver. You don’t have to worry about additional hoses, cords, or external pumps that would
normally need to attach to your ltration system. Equipped with its very own spa pole, the Spa Vac can expand
up to approximately 5 feet in length if you need to access very hard to reach areas. The on-board debris catcher
comes with a reusable lter so you don’t have to spend extra money purchasing more lter bags once they
become full. This user friendly spa vacuum is battery powered and take 8 AA batteries (included). Using The Spa
Vac cleaner will give you more time to relax and enjoy your hot tub, as opposed to spending extra time cleaning it.
®

Summary

Spa Vacuum User Manual & Instructions

Product Overview and Features

Details the Spa Vacuum's independent operation, self-contained design, and ease of use for spas and hot tubs.

Important Operational Notes

Provides essential guidance on battery handling, cleaning, assembly, and maintenance for safe and effective use.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Assembly and Parts (based on the provided diagram)

The Doheny's Spa Vacuum (Item #7582) is a self-contained, battery-powered cleaning device designed specifically for spas and hot tubs of all sizes and surfaces. It offers a convenient and efficient way to remove dirt and debris without relying on the spa's existing filtration system or requiring external hoses, cords, or pumps.

Function Description:

The primary function of the Spa Vacuum is to clean spas and hot tubs by generating suction to draw in water, dirt, and debris. This is achieved through a quiet and efficient simple pump action. The collected dirt and debris are then trapped inside an internal filter basket, while the filtered water flows back out into the spa. This process ensures that the spa remains clean and free of unwanted particles.

Important Technical Specifications:

• Power Source: Battery-powered.
• Batteries: Requires 8 AA batteries (included).
• Pole Length: Expandable up to approximately 5 feet, allowing access to hard-to-reach areas.
• Filtration: Features an on-board debris catcher with a reusable filter basket.

Usage Features:

• Independent Operation: The Spa Vacuum operates completely independently of your spa's filtration system, making it a standalone cleaning solution.
• Self-Contained: It is fully self-contained, meaning it does not require additional hoses, cords, or external pumps, simplifying its setup and use.
• Easy to Install and Maneuver: The hand-held design makes it easy to install and maneuver around the spa or hot tub.
• Simple Operation: Cleaning is initiated by simply pressing a button.
• Extendable Pole: Equipped with its own spa pole, which can extend up to about 5 feet, providing extended reach for cleaning all areas of the spa.
• User-Friendly: Designed for ease of use, allowing more time for relaxation rather than extensive cleaning.

Maintenance Features:

• Reusable Filter: The on-board debris catcher comes with a reusable filter, eliminating the need to purchase disposable filter bags. This contributes to cost savings and environmental friendliness.
• Easy Filter Basket Cleaning: The filter basket is designed for easy cleaning. After use, the collected dirt and debris can be emptied from the basket.
• Battery Compartment: The battery compartment is not waterproof and should not be submerged or allowed to get wet. This is a critical point for maintaining the device's functionality and safety.
• Battery Replacement: The manual provides instructions for replacing the 8 AA batteries when they become depleted.
• Cleaning After Every Use: It is recommended to clean the filter basket after every use to maintain optimal performance.
• Submerging for Cleaning: The vacuum's cleaning end should be underwater for cleaning to ensure proper suction and debris collection.
• Battery Removal for Storage: When not in use for extended periods, or before changing the batteries, it is important to remove the batteries to prevent potential damage from leakage or corrosion.
• Brush Maintenance: The brush can be removed for better suction or for cleaning.
• Warranty: The warranty may be voided if the 93230-02 Main Body is unscrewed, emphasizing the importance of not disassembling this core component.

Assembly and Parts (based on the provided diagram):

The device consists of several components that can be assembled and maintained. Key parts include:

• Handle Cap (93230-08): The top part of the handle.
• Handle (93230-06): The main grip section.
• Battery Case (93230-17): Houses the AA batteries.
• Waterproof Cap (93230-15): Protects internal components from water ingress (though the battery compartment itself is not waterproof).
• Switch (93230-20): Activates the vacuum.
• Main Body (93230-02): The core housing of the vacuum's motor and pump.
• Pump Body (93230-03a): Contains the pump mechanism.
• Impeller (93230-07): Creates the suction.
• Filter Net (93230-09): The reusable filter for trapping debris.
• Vacuum Mouth (93230-05): The opening through which water and debris are drawn.
• Nozzle (93230-11): An attachment for the vacuum mouth.
• Brush (93230-22): An attachment for scrubbing surfaces, which can be removed.
• AL Union (93230-01): A connecting piece.
• Position Block (93230-35): Helps secure components.
• Direct Current Motor (93230-23): Powers the pump.
• Motor Cover (93230-27): Protects the motor.
• O-Ring (93230-26): Provides seals between components.
• Gasket (93230-14): Provides seals between components.
• Self Tapping Screws (93230-19, 93230-16): Used for assembly.
• Lock Screw (90695-02): Used for securing components.
• Spring Electric Wire (90695-03): Electrical connection.
• Outer AL Pole (93230-18): Part of the extendable pole.
• Inner AL Pole (93230-04): Part of the extendable pole.

The Spa Vacuum is designed to provide a hassle-free and effective cleaning solution for spa and hot tub owners, allowing them to maintain water quality and cleanliness with minimal effort.

Doheny's Spa Vacuum Specifications

General

Brand	Doheny's
Model	Spa Vacuum
Category	Cleaning Equipment
Language	English