Need help?Do you have a question about the Doka Dokaflex S and is the answer not in the manual?
General safety instructions and warnings for users of the Dokaflex S system.
Responsibility for hazard assessment and its basis in the user information.
Requirements for providing safe workplaces and handling deviations from instructions.
Observance of applicable laws, standards, and safety rules.
Guidelines for erection, dismantling, and general use of the system according to laws and standards.
Procedures for assembly, erecting, pouring, and stripping the formwork.
Guidelines for safe handling, storage, and transport of formwork and components.
Overview of Dokaflex S's features, advantages, and ideal applications.
Illustration and list of key Dokaflex S system components.
Information on Eurex floor props, including load capacity and handling features.
Explanation of the system's spacing logic and component positioning.
Visual guide to spacing marks for props and stringers without measurement.
How Dokaflex S adapts to different layouts, including infill zones and difficult shapes.
Step-by-step guide for setting up floor props, including height adjustment.
Procedure for placing primary beams into lowering heads and adjusting height.
Guidance on using beam forks to place secondary beams and their maximum spacing.
Steps for installing intermediate props to ensure a force-fit and correct height.
Instructions for laying plywood sheets, securing them, and using stabilizers.
Warnings and guidelines for using Dokaflex S at high floor-to-slab heights.
Procedures for stripping formwork, including stress-releasing and lowering.
Steps for dismantling and removing system components and floor props.
Table for maximum permitted prop spacing in interior applications based on slab thickness.
Tables for perimeter applications based on stringer orientation and slab thickness.
Guidelines for transferring horizontal forces, especially in edge zones.
Detailed tables for bracing requirements based on slab thickness and column spacing.
Methods for transferring low horizontal loads using tie-backs for stabilization.
Description and installation of secondary-beam stabilizers to prevent tipping.
Using Dokaflex S with tables for edge zones, drop-beams, and safety railings.
Methods for safeguarding slab edges and perimeter formwork with handrail systems.
Explanation of shoring systems, reshoring, and their critical role in structural stability.
Introduction to Tipos-Doka software for efficient formwork planning and cost reduction.
Utilizing Doka multi-trip packaging for site organization and transport.
Details and specifications for various Doka floor props.
Product details for beams, bracing frames, and related components.
Product details for clamps, anchors, fall arrest sets, and other accessories.
Product details for transport boxes, pallets, and caster sets.
General| Brand | Doka |
|---|---|
| Model | Dokaflex S |
| Category | Construction Equipment |
| Language | English |
To Next Page
