Need help?Do you have a question about the Dolby Digital Atmos and is the answer not in the manual?
General| Sample Rate | Up to 192 kHz |
|---|---|
| Bit Depth | Up to 24-bit |
| Speaker Configuration | Supports various configurations, including 7.1.4, 5.1.2 |
| Audio Format | Object-based |
| Codec | Dolby TrueHD, Dolby Digital Plus |
| Maximum Bitrate | 18 Mbps (Dolby TrueHD) |
| Dynamic Range | Wide |
Guidance on how to use this document for setting up a Dolby Atmos home theater system.
Explains the Dolby Atmos technology, its advantages, and how content is mixed and adapted.
Details on source device options, AVR/processor needs, and basic playback requirements.
Discusses listener-level, overhead, and Dolby Atmos enabled speakers, including using existing ones.
Focuses on the importance of overhead sound and options for installing overhead speakers.
Explains technology creating overhead sound using speakers near the floor, covering integrated types, add-on modules, comparisons, and positioning.
Covers AVR connection, speaker wiring, bass management, distance setting, and speaker-level calibration.
Discusses combining overhead/enabled speakers and using front height speakers in Dolby Atmos systems.
Explanation of the numbering system (e.g., 5.1.4) used to describe Dolby Atmos speaker setups.
Illustrates common standard and hybrid setups for various overhead and Dolby Atmos enabled speaker configurations.
Guidelines for placing nontraditional listener-level speakers like center, screen, and surround pairs.
Provides detailed placement guidelines for various front and rear height speaker configurations.
To Next Page