Need help?Do you have a question about the Dolby Laboratories IMS3000 and is the answer not in the manual?
General| RAID | RAID 5 |
|---|---|
| 3D Support | Yes |
| Form Factor | 2U Rackmount |
| Processor | Intel Xeon |
| Supported Formats | Dolby Atmos |
| Memory | 16 GB DDR4 |
| Operating System | Linux |
Lists other Dolby documentation relevant to setting up and configuring the IMS3000.
Provides contact information for Dolby Cinema Solutions and Support via email and phone.
Details the user interface capabilities for configuring audio/video, ingesting content, and building playlists.
Describes the Dolby IMS3000's support for JPEG 2000 digital cinema package playback.
Outlines support for MPEG, H.264, and VC-1 Material Exchange Format (MXF).
Covers color conversion support and upscaling capabilities up to 4K.
Details Dolby IMS3000's compliance with security standards and forensic watermarking.
Explains the supported audio formats and lack of analog audio ports.
Describes support for various alternative content types, including HDMI, SDI, and IP streams.
Mentions preloaded test content for system testing and troubleshooting.
Lists the various types of input and output ports available on the IMS3000.
Specifies ambient temperature and humidity ranges for operation and non-operation.
Details storage options (HDD, SSD, NAS) and power consumption.
Describes the three built-in gigabit Ethernet connectors.
Notes support for eSATA, used for ingesting content.
Explains the function of the three USB ports, including support for USB 3.0.
Introduces the web-based user interface for configuration and control.
Explains that firmware, software, and SM update together in a single bundle.
Provides a step-by-step guide for updating software via a USB device.
Details the procedure for updating software using the ingest manager.
Explains how to update the software using File Transfer Protocol (FTP).
Guides users on accepting the license agreement via the web UI.
Describes how to localize the UI by selecting a site language.
Explains the process of logging into the Dolby IMS3000 system.
Details how to log out, restart, shut down, or set the system to standby.
Guides on setting the system's date and time, including NTP server configuration.
Explains how to add an NTP server to synchronize the system's time.
Provides instructions for configuring network settings like hostname and IP address.
Details how to configure Cinelister scheduler settings for playback.
Explains how to customize seek increment values for forward/backward playback control.
Describes setting an offset to resume playback after unexpected system shutdowns.
Guides on graphically configuring the scheduler, including the first day of the week.
Explains how to use Live Manager to add virtual devices as sources for live events.
Details creating a new live Composition Playlist (CPL) using Live Manager.
Guides on configuring a QNAP NAS as the main storage for the IMS3000.
Explains how to add a projector connection to the IMS3000 via Device Manager.
Details adding a Dolby DFC100 3D filter controller via Device Manager.
Guides on connecting an eCNA device using the Device Manager.
Explains how to add a JNior device connection through the Device Manager.
Describes adding a raw device for messages to generic devices via Device Manager.
Details adding a subtitle engine connection using the Device Manager.
Provides steps to delete a device from the Device Manager.
Explains how to edit existing device configurations in the Device Manager.
Guides on enabling the Dolby Deghost feature for 3D video artifact removal.
Details how to enable the RealD 3D EQ Deghost feature for 3D video enhancement.
Explains how to scan the network to find and add supported content servers.
Guides on manually adding a content feed source with protocol, IP, and credentials.
Details how to delete a content feed source from the manager.
Explains how to edit the details of an existing content feed source.
Guides on adding an NAS device for additional storage via the NAS manager.
Details how to delete an NAS device from the NAS manager.
Explains how to edit the properties of an NAS device in the NAS manager.
Guides on executing saved automation cues using the Execute Now function.
Details creating new automation cues to send commands to external devices.
Explains how to create a new automation cue in the Automation Cue tab.
Details creating and deleting trigger cues to link signals with desired actions.
Guides on creating new trigger cues in the Trigger Cue tab.
Explains how to organize quick controls by grouping similar actions.
Guides on creating and organizing quick controls by grouping automation cues.
Details how to delete quick control sections from the Quick Controls tab.
Explains how to rename or reorder quick control sections.
Guides on ingesting content using the Ingest function, scanning local/external devices.
Explains how to monitor ingest progress, pause, cancel, or resume ingest jobs.
Details uploading content, KDMs, and license files using the upload function.
Guides on using Quick Ingest feature to play directly from content source drives.
Explains ingesting content while the IMS3000 is offline via FTP to NAS.
Guides on deleting content (CPLs) from the IMS3000, including protection options.
Details how to delete decryption keys from the IMS3000.
Explains how to delete Show Playlists (SPLs) from the IMS3000.
Guides on deleting licenses from the IMS3000.
Details copying content between IMS3000 and an additional NAS device.
Guides on applying auditorium settings like screen name, aspect ratio, and color.
Explains how to enter the facility name and address information.
Guides on adding and saving new contact information within the system.
Details how to perform an integrity check to verify content component sizes.
Explains how to perform a sanity check for required content components.
Provides an overview of Cinelister features for managing SPLs, including editor and scheduler.
Guides on creating a new Show Playlist (SPL) by adding elements and saving.
Details how to delete an existing Show Playlist (SPL) from Cinelister.
Explains how to schedule SPLs using the drag-and-drop feature in Cinelister Scheduler.
Guides on scheduling an SPL to play at a specified time and setting repeat options.
Details how to delete a schedule from the Cinelister Scheduler calendar.
Explains how to play an SPL from Cinelister Playback, selecting manual or schedule mode.
Details the AES digital audio input/output ports and lack of analog ports.
Explains how to select speakers or arrays and edit equalization parameters.
Describes the parameter to bypass automatic EQ and use default presets.
Guides on adjusting output levels for speakers/arrays and generating signals.
Explains copying manual speaker EQ settings from one source to destinations.
Details using the graphic equalizer for adjusting gain across frequencies.
Guides on adjusting bass and treble settings using sliders.
Explains adjusting the output level slider and flattening the output.
Describes the Grossman equalizer for accurate frequency control and gain adjustment.
Shows a summary of auditorium audio configuration, including speaker positions.
Provides a summary of the audio routing configuration, noting support for digital outputs.
Details viewing and configuring surround speaker array delays.
Guides on configuring the internal default audio settings, including delay and EQ presets.
Details configuring default audio settings for HDMI input, including surround processing.
Explains configuring default audio settings for SDI input, including surround processing.
Guides on configuring default audio settings for non-sync audio sources.
Details configuring default audio settings for StreamIt sources.
Guides on configuring the AES input ports, including balanced/unbalanced options.
Explains configuring the AES output ports for digital audio.
Details configuring the microphone input, including gain, delay, and EQ presets.
Guides on configuring EQ settings for speakers and arrays, including adding custom presets.
Explains how to add new EQ presets, either custom or copies of existing ones.
Guides on loading or editing existing EQ presets.
Describes detailed parameters available in the EQ screen for customized presets.
Explains how to generate a test signal for system output testing.
Guides on viewing hardware, networking, and product information via the Diagnostics page.
Explains how to generate a detailed report for troubleshooting and analysis.
Describes the status overview window for component health, network, and memory status.
Details the storage window for viewing drive information and performing RAID operations.
Guides on resetting all drives in the event of RAID failure.
Explains the procedure for replacing a defective internal hard disk drive.
Guides on using the RAID cleanup utility to purge unnecessary data.
Explains how to run RAID diagnostics to diagnose the RAID.
Describes checking the health status of SM, projector connectivity, and errors in the MediaBlock window.
Guides on replacing a defective HDD from the Main Storage NAS device.
Explains reinitializing the RAID on internal and Main Storage NAS devices after multiple failures.
Guides on viewing installation steps and failure points in the Last Packages Logs tab.
Explains viewing and filtering log records by date, class, or using advanced filtering.
Details using advanced filtering options for logs based on database, severity, keywords, etc.
Guides on downloading logs by selecting database, date range, and CPL/KDM IDs.
Explains viewing system notifications and marking them as read.
Guides on configuring the automatic log upload manager for remote log transfer.
Explains how to generate backup files for SMS functions.
Guides on generating a backup file using the backup manager.
Details how to restore a backup file to the system.
Guides on deleting backup files from the backup manager.
Explains backing up, restoring, and resetting audio processor settings.
Guides on generating a Cinema Processor backup file.
Details restoring a Cinema Processor backup file.
Explains how to reset Cinema Processor settings to factory default.
Guides on recording maintenance events for tracking annual maintenance operations.
Introduces the Threshold Manager for configuring thresholds for temperatures, voltages, and counters.
Guides on configuring temperature thresholds for system components.
Explains configuring voltage threshold levels for system components.
Guides on configuring counter thresholds for system components.
Details restoring the Threshold Manager settings to their default values.
To Next Page
