Dolce Gusto GENIO - FIRST USE

8
FIRST USE
XL
STOP
XL
STOP
XL
XL
XL
1
4
7
2
5
8 9
3
30 sec
ON
6
Rinsewatertankatrst.
Fill water tank with fresh, drinking water.
Place cap and insert water tank into machine.
Start rinsing with cold water:
Push the lever up to set the bar display to
maximum level. Move lever to the left for cold
water rinsing.
Machine starts rinsing.
Waituntilcountdownisnishedandmachine
stops.
Open locking handle and insert empty capsule
holder. Close locking handle.
Placecapsulebinundercoeeoutlet.
Connect power plug to mains power socket.
Machine starts rinsing.
Waituntilcountdownisnishedandmachine
stops.
Emptycapsulebinandrellwatertankwith
fresh, drinking water.
Remove protection foil from drip grid. Place
drip grid on drip tray. Then attach drip tray at
desired position on machine.
Switch machine on. While machine is heat-
ing up, power button starts blinking red. After
approx. 30 seconds, power button light turns
steady green and machine is ready.
Continue rinsing with hot water:
Push the lever up to set the bar display to
maximum level. Move lever to the right for hot
water rinsing.