Need help?Do you have a question about the Dolphin Charger Integral 12.25 and is the answer not in the manual?
Explains hazard symbols (Danger, Warning, Caution, Precaution) and their severity.
Covers safety notes like avoiding water, heat sources, and poorly ventilated areas.
Details vertical, flat, and left-side mounting options with clearance requirements.
Details the 3-pole Winsta push-in connector for AC 230 VAC input.
Describes DC connectors, polarity warnings, and fuse requirements for main power.
Specifies cable sizing for different connections and details external signal connector ports.
Explains how DIP switches control battery technology, fridge type, and ignition feed.
Provides a table detailing specific DIP switch settings for various operations.
Lists fuse types and ratings for different product inputs/outputs.
Details the meaning of various LED indicators for power, battery status, and faults.
Illustrates the complete wiring setup and includes a critical DANGER warning.
Explains how the product charges batteries from AC, solar, and alternator sources.
Introduces the app, its availability, network range, and pairing process.
Guides through Bluetooth connection, product detection, and error handling.
Details entering the PIN and viewing the main charger dashboard.
Explains app menus and the importance of selecting the correct battery profile.
Provides comprehensive technical data on input, output, protections, and general parameters.
Details external display options and signal connector types for different models.
Addresses potential problems like blown fuses and refers to LED indicators for diagnostics.
Outlines warranty exclusions, product recycling, and CE conformity.
General| Output Voltage | 12V DC |
|---|---|
| Output Current | 25A |
| Charging Current | 25A |
| Battery Capacity | 50-250Ah |
| Input Voltage | 230V |
| Protection Features | Reverse polarity, short circuit, overload |
To Next Page