To Next PageTo Next PageWhat to do if my Dolphin DW-3280S has wash defects?
If your Dolphin Dishwasher has wash defects, it could be due to debris on the nozzles of the wash arm. Try removing any debris. Another cause could be that the detergent has run out; in this case, refill the detergent.
Why does my Dolphin DW-3280S Dishwasher have dry defects?
Dry defects in your Dolphin Dishwasher can occur for several reasons. One reason is that the rinse aid is empty, so refill it. Another reason might be that the rinse water temperature is too low; ensure the machine is operating at the proper temperature. Finally, check the rinse arm nozzle for debris and remove it if necessary.
How to fix higher forming than usual in my Dolphin DW-3280S Dishwasher?
If your Dolphin Dishwasher is forming higher than usual, it might be due to not using dishwasher detergent. Make sure to use dishwasher detergent. Another potential cause is a low wash water temperature, so check the wash water temperature.
What to do if the gas booster doesn't ignite in my Dolphin Dishwasher?
If the gas booster in your Dolphin Dishwasher isn't igniting, several factors could be at play. First, check if the gas valve is closed and open it. Also, check if the water valve is closed, and if so, open it. If that's not the issue, the batteries for ignition might be dead; try exchanging them. Finally, low water pressure can cause dripped water; try closing another valve.
Why is the wash blade weak or dripping in my Dolphin DW-3280S Dishwasher?
A weak wash blade or drip in your Dolphin Dishwasher is often caused by food or debris on the filter of the wash pump. Remove any debris from the filter to resolve this issue.
Why does the gas booster continually work in my Dolphin DW-3280S?
The gas booster continually working in your Dolphin Dishwasher may be caused by the drain pipe being taken out. Put it back on the wash tank.
General| Type | Freestanding |
|---|---|
| Child Lock | Yes |
| Half Load Option | Yes |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Delay Start | Yes |
Highlights the machine's robust washing capabilities for effective cleaning.
Ensures a high standard of cleanliness through effective washing and rinsing cycles.
Guarantees that dishes are free from any lingering detergent after the cycle.
Features integrated systems for automatic dispensing of detergents and rinse aids.
Includes an integrated booster to ensure optimal hot water temperatures for washing.
Designed for straightforward upkeep and servicing.
User-friendly interface and controls for simple and efficient operation.
Illustrates correct methods for grounding the dishwasher to prevent electrical hazards.
Warns against improper grounding to gas pipes or explosive materials.
Avoid washing poisonous items and using flammable liquids to prevent accidents.
Caution regarding hot water burns and the importance of proper electrical grounding.
Guidelines on door closure, service calls, avoiding obstructions, and water levels.
Covers ventilation, chemical handling, storage, detergent usage, and material compatibility.
Steps for verifying gas booster valve and the main power switch status.
How to confirm the controller's ready status via its indicator lamp.
Procedure for automatic water filling after closing the door.
Overview of the automatic wash, rinse, and finish cycle progression.
Advice on pre-rinsing, arranging dishes, and loading racks for optimal washing.
Detailed steps for daily cleaning, cautions, and drying the dishwasher interior.
Diagnosing and resolving issues like excessive foaming, no ignition, or booster malfunctions.
Addressing problems such as wash defects, continuous booster work, or dripping.
Resolving issues related to improper drying, weak wash/rinse, and filter blockages.
Important warnings regarding gas odors and the prohibition of flammable liquids.
