4445103123 19
Wine Refrigerators Using the wine refrigerator
EN
• For optimal energy consumption, position the shelves and drawers according to their position on delivery..
• On a regularly basis, make sure the door seal still ts properly.
• Clean dust and dirt from the condenser at regular intervals.
7.3 Positioning the bottles
NOTICE!
• Only store wine in closed and still sealed bottles.
• Do not overload the wine refrigerator.
• Do not cover the shelves with aluminum foil or any other objects, as this obstructs the air circulation.
• Be sure to use reinforced storage shelves (accessory) if you want to stack bottles.
NOTICE!
For wine refrigerators with sliding shelves:
• Make sure that the door is fully open when you pull out the shelves on roller-bearings. Otherwise the door seal
can be damaged.
• Do not put more than two layers of bottles on a sliding shelf (g. , on page 4).
• Observe the allowed number of bottles depending on the shelf-width (g. , on page 4).
For space-ecient storage note the given example (g. , on page 4). The example refers to standard Bordeaux type
bottles (g. , on page 4).
7.4 Operating elements and displays
No in g. to ,
on page 12
Symbol Description
1 On/O button
2 Light button
3
– / /
Temperature display (only zone/top or le zone)
4 Up button (only zone/top or le zone)
5 Down button (only zone/top or le zone)
6
/
Temperature display (bottom or right zone)
7 Up button (bottom or right zone)
8 Down button (bottom or right zone)
7.5 Switching on and o
► To switch on, press the on/o button briey.
► To switch o, press the on/o button for at least 5seconds.
7.6 Deactivating the key lock (only B29G, B68G)
► If the buttons are not touched for 2 minutes or longer, the key lock is activated automatically.
► To remove the key lock, press the up button and down button for at least 5 seconds.
7.7 Setting the LED interior lighting (standard mode or vitrine mode)
The LED interior lighting has two dierent modes:
• Standard mode: The interior is illuminated when the door is opened.
• Vitrine mode: The interior is illuminated constantly.
► Press the light button briey.
9
The lighting mode changes from standard mode to vitrine mode or vice-versa.