Operation CD20, CD30
12
7Operation
I
7.1 Energy saving tips
• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost your cooling device as soon as a layer of ice forms.
• Avoid unnecessarily low temperatures.
• Clean the condenser of dirt (dust etc.) at regular intervals.
7.2 Switching on the coolbox
➤ Open the coolbox drawer.
➤ To switch on the coolbox, turn the thermostat knob clockwise
(see fig. 3 1, page 4).
✓ The coolbox starts cooling the interior.
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and care” on page 14).
NOTE
Ensure that the objects placed in the coolbox are suitable for
cooling/warming to the selected temperature.
CD20-30-IO-16s.book Seite 12 Dienstag, 14. März 2017 1:56 13
To Next Page
Loading...
Need help?
General
