EasyManuals Logo

Dometic CTLP 4110 Operating Instructions

Dometic CTLP 4110
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
12
Using the toilet
4.5 Using the toilet
Pull the blade handle (2) forwards.
Leave the blade open during use.
Let some water run into the bowl before
use. Operate the flush button (1) for this.
Operate the flush button (1) again after use
to flush the bowl.
Close the blade handle (2) .
When lifting the toilet seat, it locks in an
approximately 2/3 position. Use a little
more force if you want to open the seat fur-
ther.
4.6 Emptying the cassette tank
Empty the cassette tank when the level indica-
tor LED lights up.
The cassette tank has a capacity of 19 l. When
LED (4) , Fig. 10, lights up, the tank is approx.
80 % full. This means that it can be used only
a couple of times.
Remove the cassette tank as described in
section "4.3".
Carry or wheel the holding tank to the nea-
rest authorized waste disposal point.
The cassette tank is provided with wheels
and a pull-out handle. To unlock the hand
le, push in the button (1) in middle of the
handle. Pull out the handle until it stops.
To bring the handle back into its original
position, press the handle's unlock key and
push the handle back into the cassette.
Fig. 11
Fig. 12
Fig. 13
1
2
Fig. 14
1

Table of Contents

Other manuals for Dometic CTLP 4110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dometic CTLP 4110 and is the answer not in the manual?

Dometic CTLP 4110 Specifications

General IconGeneral
BrandDometic
ModelCTLP 4110
CategoryToilets
LanguageEnglish

Related product manuals