Operation DM50
18
7.2 Using the minibar
The minibar starts cooling when connected to power. During normal
operation the Status LED is glowing. If an error occurs the Error LED is
blinking (see chapter “Troubleshooting” on page 19).
The minibar is set by default to a cooling temperature of 7 °C at an ambient
temperature of 25 °C.
You can use the setting button (1) to set the cooling temperature to one of
three values (5 °C, 12 °C and 7 °C).
Thereby the temperature will be changed in the order 5 °C … 12 °C …
7°C… 5°C etc.
➤ Press the setting button (1) and keep it pressed for 3 s, until the lamp (2)
starts to blink.
➤ Press immediately the setting button (1) again.
✓ The lamp (2) indicates the setting temperature:
– 5 °C: the lamp flashes five times in three intervals
– 12 °C: the lamp flashes once in three intervals
– 7 °C: the lamp flashes three times in three intervals
I
NOTE
The minibar sets the cooling temperature automatically to 7 °C,
when it is connected to a power source.
2 1
To Next Page
Loading...
